WorkForce 633

Cartridge prices starting at $9.99

The Epson Workforce 633 is the perfect home or small office printer as it takes up very little space but prints at a remarkable speed of up to 15 ppm for black and 7.2 ppm for color. It also offers 2-sided printing at speeds of up to 7.5 ppm for black and 4.5 ppm for color, and it has the option to use extra high-yield ink cartridges that give two times more prints per cartridge. If you're looking for more affordable options for this type of cartridge, you've come to the right place. Shop right here at Inkjets and enjoy up to 70% savings when you order our Epson 127 9-Pack Extra High Yield Remanufactured Ink Cartridges. Contact us if you want to more about our products and other offers.

Shop Cartridges for WorkForce 633

Loading...

15 Items

Set Ascending Direction
  1. Epson 126 Remanufactured High Yield Ink Cartridge 8-Pack
    Epson 126 Remanufactured High Yield Ink Cartridge 8-Pack
    Rating:
    80% of 100

    • (5) 126 Ink Cartridge Black High-Yield
    • (1) 126 Ink Cartridge Black High-Yield
    • (1) 126 (T126320) Remanufactured Magenta
    • (1) 126 (T126420) Remanufactured Yellow
    Learn More
    $42.99
    8 Cartridges / $ ea
    - +
  2. Epson 126 Color Remanufactured High Yield Ink Cartridge 3-Pack
    Epson 126 Color Remanufactured High Yield Ink Cartridge 3-Pack

    • (1) 126 (T126220) Remanufactured Cyan
    • (1) 126 (T126320) Remanufactured Magenta
    • (1) 126 (T126420) Remanufactured Yellow
    Learn More
    $19.99
    3 Cartridges / $ ea
    - +
per page

How to Replace Cartridge(s)

Here's a step-by-step guide to replacing the new ink cartridge on the Epson Workforce 633:

 

  1. Turn on the Workforce 633 and refer to the LCD screen to know which ink cartridge needs replacement. Then, press OK.
  2. Lift the scanning unit to gain access to the cartridge.
  3. Open the cartridge cover, and then pinch the tab on the empty cartridge and lift it out of the printer.
  4. Shake the new ink cartridge package four or five times, and then remove the cartridge from the package.
  5. Remove the yellow tape at the bottom of the new cartridge.
  6. Insert the new ink cartridge into the empty slot and gently press down on it until it clicks into place.
  7. Close the cartridge cover, and then close the scanning unit.

 

Frequently Asked Questions

 

What to do if ink gets on my hands or into my eyes while installing the cartridge into my Epson Workforce 633?

If ink gets on your hands, you must wash them thoroughly with water and soap. And if ink gets into your eyes, make sure to flush them immediately with water.

 

What will happen if I accidentally touched the green chip on the front of the new ink cartridge?

When handling the ink cartridge, make sure not to touch the green chip located at the front because this can damage the ink cartridge.

 

What is the difference between the extra high-yield and the high-yield ink cartridges?

The extra high-yield ink cartridges contain more ink than the high-yield ones, and as a result, they yield more pages and offer a lower cost per page.