Phaser 6000

How to Replace Cartridge(s)

To replace a cartridge for the Xerox Phaser 6000, simply follow these easy steps:

1. Open the toner access cover. Spread some paper at the right side of the printer to catch loose toner.
2. Pinch the release lever on the old toner cartridge to be replaced upward.
3. Slowly remove the old toner cartridge from the printer. Set aside old toner cartridge properly to prevent accidental toner spills.
4. Remove the new toner cartridge from its packaging. Remove protective covering on the new toner cartridge.
5. Shake the new toner cartridge about five to six times to evenly distribute toner inside.
6. Align the new toner cartridge with its corresponding slot by aligning the geared post with the hole.
7. Insert the new toner cartridge by pressing firmly on the center of the label until it clicks into place.
8. Close the toner access cover.

Frequently Asked Questions

Are there precautions to handling toner cartridges?

Toner cartridges are sensitive to light so don't leave them exposed for more than a few minutes. Install toner cartridges right away to limit exposure and prevent issues with print quality.

Should you replace toner cartridges at the same time?

Not necessarily. Toner cartridges may be rated with the same page yields but they may run out at different times, depending on what you have been printing. You may replace only what you need to, but it also doesn't hurt to stock up on consumables, ensuring you're always ready when you need a replacement.

Do you have guarantees in place?

All Xerox Phaser 106R01627 Compatible Cyan Toner Cartridges, Xerox Phaser 106R01629 Compatible Yellow Toner Cartridges, Xerox Phaser 106R01628 Compatible Magenta Toner Cartridges, and Xerox Phaser 106R01630 Compatible Black Toner Cartridges from Inkjets.com are guaranteed to work with the Xerox Phaser 6000 or you get your money back--no questions asked.