Canon PIXMA MP7600 Ink

Here's a simple guide to help you in replacing the ink tank on the Canon Pixma MP7600:

1. Turn on your Canon Pixma MP7600.
2. Lift the scanning unit. Automatically, the paper output tray will open after the printhead holder reaches the center.
3. Make sure to open the inner cover.
4. By pushing the release tab, you will be able to remove the ink tank that you wish to replace.
5. Take the replacement ink tank out of its packaging.
6. Remove the orange protective tape and film completely from the new ink tank.
7. Carefully remove the protective cap from the cartridge to avoid ink stains.
8. Put the ink tank to its corresponding slot. The lamp lights will turn red if it is correctly installed.
9. Close the inner cover followed by the scanning unit and you're done!

Frequently Asked Questions

I am waiting for a fax message when the ink suddenly runs out. Do I have to replace the empty ink cartridge in order to receive the fax message?

Not necessarily. If ink runs out while receiving a fax, the fax may be stored in memory but it will not print. You may print it later when the empty cartridge is replaced with a new one.

My Canon Pixma MP7600 has run out of black ink cartridge in the middle of a print job. Do I have to replace the empty black ink cartridge first before I resume printing?

Not necessarily. You may continue printing with an empty black ink cartridge. Simply press OK to resume printing. Be sure to order a new black cartridge during this time to have one ready for use when the print quality becomes unacceptable.

Will you ship the Canon PGI-7 And PGI-9 5-Pack Compatible Ink Cartridges free if my location is within the 48 contiguous states?

Yes. Our free shipping offer is valid on orders $30 and above and shipping to any of the 48 contiguous states.