PIXMA MX890

How to Replace Cartridge(s)

Here are the steps to replacing the ink cartridge on the Canon PIXMA MX890:

1. To access the empty ink cartridge, raise the scanning unit. Use the scanning unit support to secure it in place.
2. Press down the empty cartridge to release it from its slot and pull it upwards to remove it. Make sure to dispose the empty cartridge properly.
3. Unpack the new cartridge and remove its protective tape and film prior to installation.
4. Make sure to remove the orange protective cap from the new cartridge.
5. Slowly insert the new cartridge into the correct slot.
6. Close the scanning unit.

Frequently Asked Questions

I just installed new cartridges into my Canon PIXMA MX890, but why are the new cartridges not printing?

If your newly installed ink cartridges are not printing, it's most likely that the ink have settled at the other end of the cartridge, As a result, the ink cartridges were unable to directly feed the printhead with ink. To remedy this problem, remove the ink cartridges and let them stand upside down for a few minutes before reinstalling them.

Why does the remanufactured HP ink cartridge that I received look bigger/smaller/different than the OEM?

The physical difference that you notice between the OEM and our remanufactured version is usually the result of the rebuilt process that we put our remanufactured cartridge through. Sometimes, one or more parts need to be replaced or repaired, which result in slight change in their appearance. But this doesn't affect the performance of the cartridge.

Why didn't I receive the order tracking number via email?

If you did not receive the order tracking number in your email, it's most likely that it's sent to an incorrect email address or delivered to your SPAM or junk folder.