Epson Stylus CX7400 Ink

Stylus CX7400

Cartridge prices starting at $5.79

The Stylus CX7400 from Epson gives your desired print quality without wasting time. In just 60 seconds or one minute, you will have black and white prints with utmost quality. Even color prints are stunning with this Epson printer. No matter what your printing tasks are, you will find this Epson model reliable. And if it's a reliable Epson Stylus CX7400 ink cartridge that you need, we've got it here at Inkjets and we offer it at a reasonably low price. Choose from our Remanufactured Epson 69 (T069120) Black, Epson 69 (T069220) Cyan, Epson 69 (T069320) Magenta, and Epson 69 (T069420) Yellow Ink Cartridges and have your order shipped at a minimal shipping cost of $3.95 to the contiguous US. If you have any queries, our friendly and knowledgeable customer service representatives are ready to assist you.

How To Replace Cartridge(s)

Follow these simple steps if you need to replace the ink cartridge on the Epson Stylus CX7400:

Be sure to turn on your Epson Stylus CX7400.
Open the scanner unit, and then press the Stop button.
The printhead automatically moves to its replacement position. Wait until it is completely idle and silent before you continue.
Push the Stop button for the second time, and then open the cartridge cover.
Pull the used ink cartridge out of its slot by using the tab. Throw it according to local regulations.
To distribute the ink, shake the replacement cartridge back and forth four of five times.
Open the bag, and then take out the ink cartridge. Remove its yellow protective tape.
Slide the ink cartridge firmly into the holder until it is fully secured.
Close the cartridge cover followed by the scanner unit.
Push the Stop button to start charging the ink for about 2 minutes.

Frequently Asked Questions

How would I know if the ink cartridge in my Epson Stylus CX7400 is empty?

If the Epson Stylus CX7400 ink cartridge is empty, the ink light on the control panel stays on after turning on the printer. You may not be able to print unless the empty cartridge is replaced with a new one.

What to do if ink gets on my hands while replacing the old cartridge?

If ink gets on your hands during the replacement process, wash them thoroughly with soap and water to remove the ink.

How do I contact your Customer Service Department?

You may contact our Customer Service Department via our hotline at 1-972-200-3813, available during the office hours from 7am to 5pm (Monday to Friday, excluding Public Holidays). Or send your email to support@inkjets.com.