MFC-J4410DW

How to Replace Cartridge(s)

Replacing the old ink cartridge in your Brother MFC-J4410DW is fast and easy. Here are the steps:

1. Open the ink cartridge cover of your MFC-J4410DW. 
2. You must release the cartridge that needs replacement from the holder. To do this, simply press down the release lever.
3. Once released from the holder, pull the cartridge out slowly to avoid ink leaks.
4. Prepare the replacement ink cartridge. Remove it from the bag, and then check if it is the correct cartridge by looking at the color on the label and the color on the empty slot.
5. Remove the orange protective packing from the new cartridge.
6. Insert the cartridge into the empty slot and lightly push it in until it clicks into place.
7. Close the ink cartridge cover.

Frequently Asked Questions

What is the most likely reason why the “Cannot Detect” error message appears on the display after installing a new cartridge into the Brother MFC-J4410DW?

When the “Cannot Detect” error message appears on the LCD after the installation, the most possible reason is an improperly installed cartridge. Reinstall the cartridge properly to clear the error message.

The LCD shows “Wrong Ink Color”. What does it mean?

“Wrong Ink Color” appears on the LCD when the ink cartridge is installed in the wrong position. Check which cartridge needs adjustment, and reposition it in its corresponding slot.

What is a printhead?

A printhead is the device inside the printer that actually sprays droplets of ink onto the paper. If the printhead is damaged, you may end up with a blank piece of paper.