Canon PIXMA MP990 Ink

Replace the ink cartridge on your Canon PIXMA MP990 with these steps:

1. Verify if your PIXMA MP990 is on. Then, open the paper output tray by pressing the Open button.
2. Lift the scanning unit. The printhead holder will then move and stop at the replacement position.
3. Release the empty cartridge from the slot by pressing its ink tab. Then, lift it out of the printer.
4. Unpack the new ink cartridge and remove its orange tape by pulling it in the direction of the arrow.
5. Insert the new cartridge into the empty slot and push it down until it locks into place.
6. Close the scanning unit.

Frequently Asked Questions

I was able to replace the black, yellow, and magenta ink cartridges but not the cyan cartridge. Why won't my Canon PIXMA MP990 print even after doing this?

Check if the old cyan ink cartridge is installed because your PIXMA MP990 will not print unless all the ink cartridges are installed.

Is a replacement Canon ink cartridge necessary when dots or lines are missing from the printouts?

Not necessarily. Missing lines or dots on the printouts often occur because of clogged ink nozzles and not because of low ink level. Check if the nozzles are clogged by printing a nozzle check pattern. Clean the printhead if indeed they are clogged.

I am paying my order by check. Does Inkjets accept this payment method?

Yes. Inkjets accepts payments by check if the order is made via mail.