WorkForce 600

How to Replace Cartridge(s)

Follow this easy step-by-step guide if you need to replace the ink cartridge on the Epson WorkForce 600:

1. Turn on your device. The display panel will notify you which cartridges are empty. Take note to avoid confusion later on.
2. Raise the scanner and open the access cover of the cartridges. To remove the old tank, simply hold together its upper and lower portions and pull upwards.
3. Take out the new tank out of the wrapper and remove the film that is covering the contacts underneath.
4. Place the new tank to the chamber. Remember that the tanks color should match the slot. If not, the printer will fail to read the cartridge. Close the access cover and the scanner.

Frequently Asked Questions

I rarely use my Epson Workforce 600. How do I ensure I still get good print quality?

If you rarely use your Workforce 600, you should print a few pages at least once a month to ensure good print quality.

What to do if the print quality suddenly declines?

If the print quality suddenly declines, try cleaning the printhead up to 4 times. If print quality remains the same, then turn off your printer and wait at least six hours to let any dried ink soften. Afterwards, try performing a printhead cleaning again. If the print quality is still unacceptable, then you may have to replace one or more ink cartridges.

How do I reach you if I need to request for a refund or return of item?

If you need to return an item or request for a refund, you may call us at 1-972-200-3813 or email us at support@inkjets.com.