OfficeJet Pro 8743

How to Replace Cartridge(s)

Replacing the ink cartridges on the HP OfficeJet Pro 8743 is simple. Here's how:

1. Ensure that your OfficeJet Pro 8743 is on and the ink cartridge access door is open.
2. Once the carriage reaches its access area, locate the cartridge that needs replacement and lift it out of its slot.
3. Open the box for the replacement ink cartridge. Then, pull the cartridge out.
4. Slowly insert the cartridge into the proper slot. You will hear an audible click once it is fully installed.
5. If needed, repeat the process above for any ink cartridges that are needed to be replaced.
6. Close the ink cartridge access door. Your HP device is now available for printing!

Frequently Asked Questions

Do I have to replace the HP Officejet Pro 8743 ink cartridges if the printouts are very light?

Not necessarily. Try cleaning the printhead first because the print quality issue may just be a result of clogged nozzles. If after cleaning the printhead the print results are still very light, then check if there's any cartridge that has critically low ink level.

Which is better: a high-yield cartridge or a standard cartridge?

It actually depends on your printing requirements. If you print more often, the high-yield cartridge is a better option as it offers more value for money and convenience. But if you have average printing requirements, then stick to the standard cartridge.

What is the difference between the HP 956XL and the HP 952XL?

The difference between the 956XL and 952XL is the amount of that they contain. The 956XL contains more ink so it yields more pages than the 952XL.